Assembling a Bench using CargoSmart Folding Workbench Brackets for E-Track or X-Track

Question

Question:

I would like to know how I would adopt this product for a garage wall fold down bench. Do I still need the single brackets for this unit to rest into?

asked by: Timothy K

0

Expert Reply:

The CargoSmart Folding Workbench Brackets for E-Track or X-Track, # 3481744 lets you create a fold-out workbench or seat and mounts to X-track and E-track rails. I suggest using something such as the CargoSmart Horizontal or Vertical X-Track, # 3486500 that is 3" long for a single anchor point option. Or something such as the etrailer Horizontal E-Track, # e75VR that is 3' in length allowing you to raise and lower the bench height from being used to sit on to a work bench/table height.

expert reply by: Michael R

0

Answer 1

The CargoSmart Folding Workbench #3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount #3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits…

view full answer...

Answer 2

You may not even need load resistors to switch to LED lights. The best thing to do is to try the lights without load resistors first. No need to purchase something you may not need until you know need it. Load resistors such as #DI34ZR dissipate heat…

view full answer...

Answer 3

The legs for the CargoSmart Folding Workbench Brackets #3481744 will sit 22-21/2" away from the wall when in the deployed position, and then the brackets are 2-1/2" tall so they will stick out that far from the wall. My contact at…

view full answer...

Answer 4

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Assembling a Bench using CargoSmart Folding Workbench Brackets for E-Track or X-Track

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching