Flag And Flagpole Kit For A Southbay 522 RS Pontoon Boat

Question

Question:

Do you have any american flags i can mount to my southbay 522 rs??

asked by: Jeffrey

0

Expert Reply:

We have just what you need for your Southbay. The Taylor Made USA Boat Flag Kit for Pontoon Boats # 369921 is an all-in-one kit that includes a 12" x18" American Flag, a marine grade flag pole, and mounting hardware.

The black clips used to secure the flag to the pole are rated for speeds reaching 50 mph, and allow for easy detaching.

expert reply by: Bryce D

0

Answer 1

The only flag kit available is the Taylor Made USA Boat Flag Kit for Pontoon Boats - 12" Tall x 18" Long Flag - 24" Pole #369921. Unfortunately, this would require drilling since there is no clamp on option. It does, however, have a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 8

The 2022 Subaru Outback and Outback Wilderness share the same hitch fits. Although the #DT73RR Draw-Tite Class III hitch is a fit for your vehicle, once installed the entire hitch would be visible from the rear. If that doesn't bother you, this…

view full answer...

Answer 9

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 12

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

view full answer...

Flag And Flagpole Kit For A Southbay 522 RS Pontoon Boat

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching