Recommended Trailer Hitch Receiver For A 2022 Toyota Highlander Limited With Weight Distribution

Question

Question:

I need a hitch for my Highlander. It needs to be compatible with a weight distribution system as well.

asked by: Wil

0

Expert Reply:

For your 2022 Toyota Highlander Limited I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C45CR. This hitch is rated for a maximum gross trailer weight capacity of 6,000lbs (8,000lbs with WDH) and a maximum tongue weight capacity of 900lbs (900lbs with WDH). That being said this hitch does not increase the capacities of your Highlander so you'll need to review your owner's manual and go with whichever is the lower capacity.

This hitch has a simple bolt-on installation with no drilling required. Trimming or removal of underbody panel is required for installation. This hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost. This hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare tires will not be able to be stored under the vehicle.

You'll also need a 4-pole connector to transfer the lighting signals from Highlander to the trailer so I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99FR. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the trim panel near the driver's side rear seat belt bracket. You will have to pull back the side trim panel to access this harness.

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket like # 18144 is recommended to keep the connector secure.

For a great starter ball mount kit I recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500lbs # 989900. It has a 1-7/8" hitch and 2" hitch ball to allow you to tow multiple trailers. It has a 1" or 3" rise and a 2" or 4" drop to keep your trailer level while towing.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Nick, the Trimax Trailer Wheel Chock and Lock #TMX75FR you're looking at will work with your 175/80r13 trailer tires. This lock has measures 6" wide when closed and 10 1/2" when opened all the way, so with your tires measuring…

view full answer...

Answer 6

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 9

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

view full answer...

Answer 10

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

We do offer a hitch that will fit the 2023 Toyota Highlander XLE. Basically any hitch listed under "excluding XSE" is going to fit the XLE model. For you I recommend the EcoHitch Class 3 Trailer Hitch #EH35VR. The main reason I prefer this…

view full answer...