Waterproof Storage Cover For Arctic Fox 811 Truck Bed Camper

Question

Question:

I have a 2011 Arctic Fox 811 camper that needs a cover. Not sure which model to get and/or size. I want a waterproof cover though. Can you show/send me your recommendations?

asked by: Ryan E

0

Expert Reply:

I recommend the Adco SFS AquaShed Truck Camper Cover - 17-3/4' Long - Gray # 290-12264. It offers better UV, dust, water and in general weather protection than the average RV storage cover.

expert reply by: David B

0

Answer 1

I did some research on your Arctic Fox 811 Truck Camper and it looks like the best fit cover we have for you is the Camco UltraGuard Slide-In Camper Cover part #CAM45770. This cover is a top of the line option that has triple layer protection which…

view full answer...

Answer 2

The Adco SFS AquaShed RV Cover for Truck Campers up to 10' Long #290-12264 has weighted straps that buckle underneath your camper to secure it to the body. The excess material can be tightened up with the cinch ropes at the front and rear of the…

view full answer...

Answer 3

I recommend using one of our Adco SFS AquaShed Truck Camper Covers for your application. If you can let me know what the length of your box is I can make a specific recommendation for you. For example, if by "8" you mean the total box…

view full answer...

Answer 4

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 12

The best solution for your Ford F-150 is to get two of the Durabilt Hammerlock Coupling Link for 1/2" Chain #DU96MR. This style of link is a little difficult to install but it's very secure and is designed specifically for the size of chain…

view full answer...

Waterproof Storage Cover For Arctic Fox 811 Truck Bed Camper

Product Page this Question was Asked From

Continue Researching