2021 Tesla Model 3 Concerns with Corrosion After Install of EcoHitch Stealth Receiver

Question

Question:

I have a 2021 Tesla Model 3 and have been researching options for a hitch. I like the EcoHitch Stealth but have read some where there is cutting needed and possible corrosion occurring because of this. How much of a concern is this?

asked by: Christina

0

Expert Reply:

Yes, this has come up several times as it is a valid concern because installing the EcoHitch Stealth Trailer Hitch Receiver # 306-X7373 does indeed require cutting. There is a 3-1/2" or 4" oval cut on the underbody trim to allow clearance for the removable 2" drop-down receiver and this opening to the elements causes concerns. But there is the availability of the Undercover Access Hole Cover # 306-XA2002. This is specifically designed to slide into the hitch when the receiver is removed to cover up that opening and also maintain a clean factory look on the vehicle.

Please note the linked images and the product review and installation videos below.

expert reply by: Michael R

0

Undercover Access Hole Cover_306-XA2002_002
(click to enlarge)

Undercover Access Hole Cover_306-XA2002_001
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

2021 Tesla Model 3 Concerns with Corrosion After Install of EcoHitch Stealth Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching