Trailer Hitch that Fits 2007 BMW 328 Convertible

Question

Question:

Hi, Do you carry a hitch that will fit my 2007 BMW 328 convertible? Thank you.

asked by: William K

0

Expert Reply:

For a 2007 BMW 328 convertible we have the Stealth Hitch part # SH94VR which is a confirmed fit. This hitch has a removable lower opening that you'd be able to take off when not in use giving you a totally hidden solution.

expert reply by: Jameson C

0

Answer 1

For your 2008 BMW M3, you will want the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" #SH97VR for a bike rack or accessory. If you want to do light towing as well you will instead use the Stealth Hitches Hidden Trailer Hitch Receiver w/…

view full answer...

Answer 2

We have hitches that fit your 2007 BMW 335i convertible with the Stealth hitch part #SH94VR but the Curt you mentioned does not fit.

view full answer...

Answer 3

The Stealth Hitches Hidden Rack Receiver #SH94VR, which is a fit for a 2007 to 2013 BMW 3 Series Convertible (excluding the M3), will weight a little over 42 pounds and ships in a box measuring 41" x 12" x 8". As a side note, this unit…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Trailer Hitch that Fits 2007 BMW 328 Convertible

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching