Can Replacement Cam Lock Cylinder 295-000004 be Ordered With Specific Key

Question

Question:

I am interested in the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-1/8 inch Long tem # 295-000004 I have existing locks with the key G366 and I want to know if the above item can be keyed to match up with my existing keys. If not I need to order a lock cylinder that will use my G366 key

asked by: Ryan

0

Expert Reply:

We get asked this quite a bit so I know it's disappointing but there is no way to get a specific key number for the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-1/8" Long # 295-000004 or any other Global Link cylinder.

expert reply by: Kyle S

0

Answer 1

You can order replacement keys for your Lippert Slam Latch for RV Doors #LC54PJ with part #LC230012. These slam latches all use the same key so this is the only replacement you'll need.

view full answer...

Answer 2

There are a few dozen different possible keys/locks so chances are quite good that you would not get the same key/lock that is used heavily throughout the industry.

view full answer...

Answer 3

To clear this matter up I took a walk to the warehouse to measure the Replacement Cam Lock Cylinder for RVs - 1-1/8" Long #295-000004 and found that the measurement is taken from the threaded portion of the cylinder. Cylinder #295-000004…

view full answer...

Answer 4

The Global Link Keys like the one with the lock part #295-000004 are all purple. We do not carry global link keys of a different color. We do carry the 1-1/8" Camco Cam Lock for baggage doors part #CAM44363 that comes with gold colored keys.

view full answer...

Answer 5

I do have an option for you but as we do not carry TriMark, I would not have the correct key for you. Instead, the only option I would be able to offer you is either a new lock core/key or a new entry door latch. If the lock core you have in your…

view full answer...

Answer 6

We can get the Replacement Cam Lock Cylinder for RVs part #295-000004 keyed alike but there is no way to get a particular key number to match the lock number you currently have. I have linked the video on the replacement process below for you to…

view full answer...

Answer 7

The 1/8" thick tape is most common for side window installation and repairs so I recommend the Alpha Systems Butyl Tape for RV Weatherproofing part #AL42FJ for this. It can always be doubled up if needed. I recommend the 3/16" thick tape…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 12

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...