What Front Hitch do You Recommend for My 2021 Jeep Wrangler JL Unlimited Rubicon?

Question

Question:

what front trailer hitch do you recommend for my 2021 Jeep Wrangler JL Unlimited Rubicon?

asked by: Mike P

0

Expert Reply:

For your 2021 Jeep Wrangler JL Rubicon, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65079. Apart from offering the highest weight capacity we offer (500 vertical load/5,000 gross trailer weight), it also involves an easy installation that only takes around 1 hour to complete. The Draw-Tite also includes an e-coat underneath the black powder coat that gives you extra resistance against rust and corrosion.

expert reply by: Bob C

0

Answer 1

Yes, there is! To add a hitch to your 2024 Jeep Wrangler Unlimited Rubicon you will want the Draw-Tite item #65079. This front mount hitch is custom fit and bolts to your Jeep with included hardware. It has a 2" receiver that can tow up to a…

view full answer...

Answer 2

No, it does not but I have one that does. For your 2023 Jeep Wrangler Rubicon you will want the Draw-Tite Front Mount Trailer Hitch item #65079. This front hitch is custom fit and bolts to your Jeep with included hardware. The Draw-Tite Front Mount…

view full answer...

Answer 3

To add a front mounted hitch to your 2023 Jeep Wrangler Unlimited, I recommend the Draw-Tite Front Mount Trailer Hitch item #65079. This hitch is custom fit and bolts to your Jeep with included hardware. This front mounted hitch has a 500 lbs…

view full answer...

Answer 4

Curt has confirmed for us that the front hitch part #C31086 that you referenced fits all models of the 2018 Jeep JL Wrangler including the Rubicon that has the factory winch.

view full answer...

Answer 5

If your winch plate is on top of the front bumper or through the middle of it the Draw Tite hitch part #65079 will fit below it just fine. If the winch plate in any way hangs below the stock bumper location it would interfere with the hitch.

view full answer...

Answer 6

As long as you have the factory front bumper on your 2018 Jeep Wrangler Unlimited Rubicon, the Draw-Tite Front Mount Trailer Hitch Receiver #65079 is a confirmed fit. I've attached the installation details for you. It does not require any…

view full answer...

Answer 7

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 8

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 9

There is not a fuse we carry for the 8000 Series of Fan-Tastic vent. It does use a 4 amp slow blow fuse so to make fuse access simpler you can use In-Line Fuse Holder #C58470-1 and if you need to replace the bow-tie bracket, motor, and blade the…

view full answer...

Answer 10

When the instruction manual for the Curt TruTrack Weight Distribution System part #C17499 states to set the bracket height closest to the spring bar position set with the jack earlier, they are referring to the when you raised the front of the…

view full answer...

Answer 11

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 2022/2023 Coleman 17B travel trailer. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of 8,000lbs. With a dry tongue weight of 385lbs by the time…

view full answer...

Answer 12

Yes, the track/channel dimensions between the Rhino Rack and Yakima roof racks are the same dimensions so the Yakima T-bolts part #Y8880184 that you referenced will fit and work well.

view full answer...

What Front Hitch do You Recommend for My 2021 Jeep Wrangler JL Unlimited Rubicon?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching