Does Curt Front Hitch # C31086 Fit 2018 Jeep Wrangler JL Rubicon with Winch

Question

Question:

will it fit with 2018 Rubicon JL that has a factory winch on it?

asked by: Tom L

0

Expert Reply:

Curt has confirmed for us that the front hitch part # C31086 that you referenced fits all models of the 2018 Jeep JL Wrangler including the Rubicon that has the factory winch.

expert reply by: Jameson C

0

Answer 1

You can install the Curt front hitch #C31086 on your 2021 Jeep Wrangler Rubicon but you will have to modify the heat shield like you mentioned. The Draw Tite part #65079 is also a fit and requires less modification though so it would be what I would…

view full answer...

Answer 2

No, it does not but I have one that does. For your 2023 Jeep Wrangler Rubicon you will want the Draw-Tite Front Mount Trailer Hitch item #65079. This front hitch is custom fit and bolts to your Jeep with included hardware. The Draw-Tite Front Mount…

view full answer...

Answer 3

As long as you have the factory front bumper on your 2018 Jeep Wrangler Unlimited Rubicon, the Draw-Tite Front Mount Trailer Hitch Receiver #65079 is a confirmed fit. I've attached the installation details for you. It does not require any…

view full answer...

Answer 4

I reached out both to Curt and Draw-Tite about the installation of their front mount hitches, parts #C31086 and #65079 respectively, on your 2018 Jeep Wrangler Rubicon and I pretty much got the same answer from both of them. The plastic pieces are…

view full answer...

Answer 5

If your winch plate is on top of the front bumper or through the middle of it the Draw Tite hitch part #65079 will fit below it just fine. If the winch plate in any way hangs below the stock bumper location it would interfere with the hitch.

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65079 is a confirmed fit for your Jeep with steel bumper. The front metal air dam will be permanently removed for this installation. The Curt #C31086 is also a fit but isn't…

view full answer...

Answer 7

For your 2021 Jeep Wrangler JL Rubicon, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65079. Apart from offering the highest weight capacity we offer (500 vertical load/5,000 gross trailer weight), it also…

view full answer...

Answer 8

To add a front mounted hitch to your 2023 Jeep Wrangler Unlimited, I recommend the Draw-Tite Front Mount Trailer Hitch item #65079. This hitch is custom fit and bolts to your Jeep with included hardware. This front mounted hitch has a 500 lbs…

view full answer...

Answer 9

When the instruction manual for the Curt TruTrack Weight Distribution System part #C17499 states to set the bracket height closest to the spring bar position set with the jack earlier, they are referring to the when you raised the front of the…

view full answer...

Answer 10

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 2022/2023 Coleman 17B travel trailer. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of 8,000lbs. With a dry tongue weight of 385lbs by the time…

view full answer...

Answer 11

You can raise your trailer about 2 more inches using the Correct Track Trailer Alignment and 2" Lift Kit - Single Axle #LC87120. Then you can also add longer hangers if you prefer. We do have long hangers like #115919 which are the longest…

view full answer...

Answer 12

If the center to center distance between adjacent tire mounting holes is 2-5/8 inches, you do indeed have a 5 on 4-1/2 inch bolt pattern. Going with two of the Kenda Karrier #AM32181 ST215/75-14 load range C radials which carry an 81mph M speed…

view full answer...