What Size Range Of Wire Gauges Work With The Progressive Dynamics Converter

Question

Question:

What size wire will the terminals on the 60amp convertor/charger accept, also what size welding cable will fit the terminals?

asked by: Glen M

1

Answer 1

If the fuses are good and there's still no power output it would be time for a new converter which we have an exact replacement with the part #PD9160A. The C version is not an updated version and is not one we carry.

view full answer...

Answer 2

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger models, #PD9260C and #PD9160A have a rated power output of 810 watts and 60 amps. The #PD9260C uses the Charge Wizard multistage charging system. Using the built-in Charge…

view full answer...

Answer 3

The Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 12V - 60 Amps, part #PD9160ALV, should be grounded to the frame of the trailer. Both the DC negative of your busbar and the negative terminal of your converter will be…

view full answer...

Answer 4

Going with an even rated or higher converter would be your best option. You could go with a 60 amp rated one like the Progressive Dynamics part #PD9160ALV or the next higher option is 80 amps with part #PD9180ALV. It's better to have more amps…

view full answer...

Answer 5

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to issues…

view full answer...

Answer 6

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

view full answer...

Answer 9

The answer to your question will depend on how you use your truck. Vehicle-based systems like the RoadActive Suspension system or air bags will work just fine with a weight distribution system, but they work best to suspend weight being hauled in the…

view full answer...

What Size Range Of Wire Gauges Work With The Progressive Dynamics Converter

Continue Researching