Replacement Progressive Dynamics Converter PD9160A

Question

Question:

my PD9160A was hooked up to bad power. Fuses are good but no power output. Can it be repaired or buy a new unit ? Is the model PD9160C just a newer unit than PD9160A? THANKS

asked by: Thomas K

0

Expert Reply:

If the fuses are good and there's still no power output it would be time for a new converter which we have an exact replacement with the part # PD9160A. The C version is not an updated version and is not one we carry.

expert reply by: Jameson C

0

Answer 1

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 60 Amps #PD9260C comes with a 2-year warranty, which covers any type of manufacturer defect. I have added a link to a video review of this converter for you to…

view full answer...

Answer 2

I took a look at the instruction manual of the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9280A and when using the Converter Status Remote Pendant for Progressive Dynamics Inteli-Power PD9200 Series Converters…

view full answer...

Answer 3

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C you referenced will charge your trailer's battery and convert AC to DC power when hooked up to shore power. It uses an integrated Charge Wizard that…

view full answer...

Answer 4

If you purchase it from us, the Progressive Dynamics #PD9280A Power Converter/Charger does indeed have a 14 digit serial number that begins with the letter 'A'. The carries the full 2 year manufacturer's warranty. This has…

view full answer...

Answer 5

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned…

view full answer...

Answer 6

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger models, #PD9260C and #PD9160A have a rated power output of 810 watts and 60 amps. The #PD9260C uses the Charge Wizard multistage charging system. Using the built-in Charge…

view full answer...

Answer 7

The size range and gauge of wires to fit the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 12V - 60 Amps #PD9160ALV are between 2 and 14 AWG.

view full answer...

Answer 8

The only difference between the Progressive Dynamics Inteli-Power RV Converter and Battery Charger #PD9160A and the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C is the charging cycles. The #PD9160A only has one…

view full answer...

Answer 9

The Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 12V - 60 Amps #PD9160ALV is designed to work with lithium iron phosphate batteries. And the Charge wizard is not compatible with this either. However the Progressive…

view full answer...

Answer 10

Yes, the 60-Amp Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger, #PD9260C can be used to replace your existing PD9155. This will provide a slightly higher charge rate but it is not a dramatic enough rate change to cause…

view full answer...

Answer 11

I reached out to my contact at Progressive Dynamics and he said the 60 amp #PD9160A Converter will work just fine to replace your existing PD9155. The slight increase in amperage isn't an issue at all and there aren't any safety concerns.…

view full answer...

Answer 12

Though there may need to be some modifications needed to get it installed, the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 60 Amps #PD9260C will work as a good replacement for your WFCO WF-9855. One potential…

view full answer...