Replacement Tarp for Trifecta 2.0/ Truck Hero by Extang

Question

Question:

Hi, I have a 2017 Chevy Silverado 1500, LT, Z71 short box 78.9 pickup truck with an existing black. Extang, Trifecta 2.0 truck hero folding tonneau cover. I ripped the cover today and wanted to see if I could replace the fabric without having to replace the entire system. I see you sell replacement tarps for this brand. My question is: how difficult is it to actually take the ripped tarp off and replace it with the new one? Do you have any instructions or a video showing how the replacement is made.

asked by: Chris V

0

Expert Reply:

Yes, we do offer a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl item # EX92450. This is the entire system for your 2017 Chevrolet Silverado 1500 short bed. The replacement cover you need is Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover item # EX92450-20. I linked the installation instructions and a video for you to take a look at. I went over them and replacing the cover looks pretty easy. With the frame and rails already installed it should not take long at all to take out the damaged cover and replace it with the new one.

expert reply by: Jerred H

0

Answer 1

What year is your truck? The tarp you referenced is a replacement for a short bed Dodge Ram between 2002 and 2008.

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 3

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 4

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item #L11390 that comes with the CE Smith Trailer Idler Hub Assembly item #CE13515. You can use your blue marine grease but you can't mix…

view full answer...

Replacement Tarp for Trifecta 2.0/ Truck Hero by Extang

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching