What Replacement Bolts do I Need from # THKIT3101?

Question

Question:

Hi. I have Thule tracks on my fiberglass Leer topper with Thule Probars, 460R towers, and 3101 fit kit. I misplaced the bolts that screw into the track nuts that attach rack to the track. Can I order those through etrailer? Thank you.

asked by: Heath

0

Expert Reply:

As far as replacing the missing bolts from the Fit Kit for Thule Podium-Style Roof Rack Feet # THKIT3101, I confirmed with Thule that unfortunately the fit kits come pre-packaged from the manufacturer in Europe. Sadly, the only way to replace the missing bolts is to buy a complete new kit.

expert reply by: Bob C

0

Answer 1

The dimensions of the track nut in the Fit Kit for Thule Podium-Style Roof Rack Feet part #THKIT3101 is as follows: Thickness - .16 inches Long Sides - .993 inches Short Sides - .447 inches Width - .47 inches Long Point to Long Point - 1.32 inches…

view full answer...

Answer 2

Yes, the track nut used for the Thule Fit Kit #THKIT3101 is the same one that was used for the discontinued TK1. If you are just needing to replace the track nut then we have it available as part #853-2106 on our site.

view full answer...

Answer 3

I have an answer for you. As far as the replacement parts for the Thule Fit Kit for Thule Podium Style Roof Racks - 3101 #THKIT3101, those components are unfortunately not sold individually. This is because since Thule fit kits are designed for…

view full answer...

Answer 4

It sounds like you may be looking for the Thule Fit kit for Podium Feet in channels part #THKIT3101. The fit kit includes pads, bolts, plates and channel nuts for adapting the Podium legs for use with tracks.

view full answer...

Answer 5

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

view full answer...

Answer 6

The Thule Roof Rack Fit Kit, #THKIT3101, is designed for use with Thule Podium Foot Packs, #TH460R, and a specific year-make-model vehicle. If you would like to send me the year-make-model of your specific vehicle I can make a recommendation for all…

view full answer...

Answer 7

The Fit Kit for Thule Podium-Style Roof Rack Feet - 3101 #THKIT3101 does not have the covers available separately. You will need to replace the kit to get the covers.

view full answer...

Answer 8

Seems like you're needing something that is a bit skinnier on your roof since you have other attachments on your roof already. That being said this Thule Pulse Alpine Box #TH613 is only 25-1/2" wide x 88-1/2" long x 12-1/2" tall.…

view full answer...

Answer 9

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

What Replacement Bolts do I Need from # THKIT3101?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching