Ladder Rack for 2021 Toyota Tacoma that Fits with BAK Flip MX4 Tonneau Cover

Question

Question:

Thanks. Whats the product # for the matte black rack for the 5 foot bed

asked by: Woody M

0

Expert Reply:

I have a solution for your but since the Thule TracRack TracONE ladder racks like the # TH27000XT-501 attach by wrapping around the bed rails they cannot fit with a tonneau cover like the BAK Flip Mx4 part # BAK48426 if you have a 5 foot bed or # BAK48427 for if you have a 6 foot bed.

So instead you'd want a ladder rack that attaches to the top of the bed rails like the Adarac Pro Series which also has vertical uprights that help with tonneau cover panel folding clearance. If you had a 6 foot bed you'd want the part # A86ZR or a 5 foot bed part # A66ZR and you'd be set.

expert reply by: Jameson C

0

Woody M.

11/16/2021

Thanks. Whats the product # for the matte black rack for the 5 foot bed

Reply

Jameson C.

11/16/2021

For that you'd want the part # A76ZR.

Reply

Answer 1

I have a similar option for you but they do not make a ladder rack and tonneau cover combination that works with one another on your 2018 Toyota Tacoma. Instead you will want to use the BAK Revolver X2 Hard Tonneau Cover with Track System part…

view full answer...

Answer 2

I have a solution that will allow your 2020 Toyota Tacoma 6 foot bed to have both a tonneau and a ladder rack installed at the same time but it will require a new tonneau as the folding tonneaus don't allow a way to fit a ladder rack with them…

view full answer...

Answer 3

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 4

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 5

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 6

I'm pretty sure you are correct that the Coil SumoSprings Custom Helper Springs #CSS-1145R will fit your 2018 Toyota Highlander, however, we haven't had the chance to test this out and SuperSprings doesn't have this listed in their…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...