Ladder Rack and Tonneau Cover That Fit 2020 Toyota Tacoma 6 ft Bed

Question

Question:

I have a trifold tonneau cover on my 2020 Tacoma. Do you have a rack system that would work with that? Ty

asked by: J.Ernie C

0

Expert Reply:

I have a solution that will allow your 2020 Toyota Tacoma 6 foot bed to have both a tonneau and a ladder rack installed at the same time but it will require a new tonneau as the folding tonneaus don't allow a way to fit a ladder rack with them since they go over the bed rails.

So for a tonneau you'd want the RetraxONE XR part # RTT-60852 which has tracks designed for a ladder rack and then you can then install the Yakima OverHaul HD Adjustable Truck Rack w/ Retrax XR Tonneau Cover Adapter # Y01151-5855 and you'd have an adjustable ladder rack that has 68 inch long HD style bars.

Or you could keep your current tonneau and install a Rhino Rack # RRVA137B-2, # RRRLKVA and # DK174.

expert reply by: Jameson C

0

Answer 1

I have a tonneau cover answer for you. Without knowing the exact way the Peragon tonneau cover mounts to your 6-foot bed on your 2020 Toyota Tacoma access cab, I cannot confirm for sure if there is a compatible ladder rack with your truck. However,…

view full answer...

Answer 2

I have a solution for your but since the Thule TracRack TracONE ladder racks like the #TH27000XT-501 attach by wrapping around the bed rails they cannot fit with a tonneau cover like the BAK Flip Mx4 part #BAK48426 if you have a 5 foot bed or…

view full answer...

Answer 3

Depending on the style of your tonneau cover you could add on a ladder rack to your 2020 Toyota Tacoma. If your current cover sits inside of the bedrails then you'll be able to use the Adarac Pro Series Custom Truck Bed Ladder Rack #A76ZR (5'…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 8

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT actually only fits on the black TracRac rails which have a raised section for the base to fit on (see attached), as opposed to the RetraxONE XR rails which essentially have a T-Slot. The…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...