Storage Cover For a 2021 Grand Design Reflection 295RL 5TH Wheel Camper That is 329 Long

Question

Question:

will this fit Grand Design 295 RL 5th wheel

asked by: Bob N

0

Expert Reply:

Yes, the Adco SFS AquaShed RV Cover # 290-52255 is the correct size for your 2021 Grand Design Reflection 295RL 5th wheel camper. This cover is adjustable so that you can make it snug on your Reflection.

We also have the New Adco Olefin HD Cover # AD49ZR which has more durable fabric and will work better if you store your Reflection long term.

I do recommend using the Camco Mini Dehumidifier # CAM44195 in your camper to keep the humidity down and prevent musky odors. Depending on your climate you may need more than one of these placed in your camper.

expert reply by: Bud M

0

Answer 1

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 2

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 3

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 4

Yes, the Extang E-Series Tonneau part #EX27UV does fit trucks that have spray-in bed liners and bed rail covers. The cover brackets can clamp to your bed rails without requiring trimming the cover as well.

view full answer...

Answer 5

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Answer 6

Hey Jerry, for a B&W Companion hitch I recommend using a 10 inch diameter lube plate. We have the Reese Lube Plate, #RP83002, which is my top choice, and the Curt 10 inch Fifth Wheel Trailer Hitch Lube Plate, #16721, both of which will work…

view full answer...

Answer 7

Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…

view full answer...

Answer 8

A rotating pin box like the Lippert Turning Point will relocate the pivot point between the hitch and pin box 22 inches rearward, from the point where the king pin locks into the hitch jaws to the point where the pin box turret attaches to the 5th…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package #BWRVK3600 weighs 212 lbs.

view full answer...

Answer 11

Most 5th wheel trailer hitches with a 4-way pivoting head do not tilt as much to the sides as they do front to back. But it is hard to show the tilt to the sides on some hitches when there is no weight on them. Otherwise the B&W Companion…

view full answer...

Answer 12

If you haven't already you'll want to pull the pins that connect head of your B&W Companion #BWRVK3600 to the base. From there you'll be able to lift the head off of the pivot arms by pulling up on the handles with rubber grips on…

view full answer...