What Size Spindle is Needed for a M/H trailer
Question:
How do I know which spindle to order for this type trailer? It is a 5ft. X 12ft. trailer and I would say light weight. I bought it used and do not have any info. in regards to size axle or spindle. Please reply ASAP. Thanks, James
asked by: James E
Expert Reply:
The axle spindle you need to order will depend on the weight capacity of your trailer and on the type of spindle (see link) already being used, if you only need to replace one spindle.
To figure out which spindle is correct you can use the bearing part numbers, both inner and outer, and the shape and length of the spindle stub on your trailer. The bearing numbers will let you cross reference the correct spindle measurements for your hub. The axle stub shape and length will allow you to use the same mounting position as the original spindle.
Your trailer weight capacity can usually be found on a tag near the tongue of the trailer or stamped into the coupler itself.
If you need to replace both spindles, bearings, races, seals and hubs you can use any spindle of similar construction that is rated heavy enough for the trailers capacity and purchase the correct hub assembly (see link) to go with the spindles. Be sure to order the correct bolt pattern for your trailers wheel and tire combination.
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 6,000 lbs
- Q&A: Should Utility Trailer use Mobile Home Axles
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Search Results: spring mounting hardware
- Search Results: springs
- Search Results: #42
- Q&A: What Material are Trailer Spindles Made of
- Q&A: Availability of Spindle and Hubs for 10,000 lb Trailer Axle
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: U-Bolt Plate for 3" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Search Results: 6000 lb spindle
- Q&A: Replacement Bearings 2788 and 1779
- Q&A: Replacement Spindle for 7,000 lbs Axle
- Q&A: Process for Changing a Damaged Spindle on a Trailer Axle
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: axle
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: trailer jack
- Search Results: leaf spring
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Shop: Gooseneck Hitch
on Trailer Spindles
