Can A Whispbar S28W Roof Rack Use The Yakima Fit Kit To Fit A 2022 Nissan Rogue sport

Question

Question:

I’m wondering if the Yakima flush bar custom fit kit would work with attaching my wisp bar to my rogue sport apparently it is too big so it won’t fit right now

asked by: Meredith

0

Expert Reply:

With the Whispbar line being discontinued in North America in the Fall of 2016, I cannot say the if Yakima Fit Kit # Y00158 will be compatible. However, I was able to find one old listing that did mention the lengths of the bars that came with your Whispbar S28W Flush Bar Pack (1100mm and 1150mm), and they will be a bit longer than the Yakima FlushBar Crossbars # Y00456-0457 (1047mm and 997mm) that are designed for your 2022 Nissan Rogue Sport.

I know it's a bummer to do this, especially with your Whispbar racking looking to be in good working order, but I do recommend replacing your system and going with the Yakima # Y00456-0457 crossbars and # Y00158 fit kit.

expert reply by: Lazer S

0

Answer 1

The Yakima SkyBox NX 16 Roof Cargo Box - 16 cu ft - Black Carbonite #Y95NX you referenced is absolutely compatible with Rhino-Rack Vortex Aero Crossbars. The crossbar spread simply need to be between 24 and 36 inches on center.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 8

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 9

For the etrailer Hitch #e98902, the only possible trimming you need to do is if the seam seals overhang on the housing locations on your 2021 Mazda CX-5. This is if you do not have a Grand Touring model. If you happen to have the Grand Touring Model,…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...