Will Detail K2 Snowplow for 2 Hitches Fit Lifted Truck  

I spoke with my contact at Detail K2 who said that the height of the front hitch receiver on your 2005 Jeep Wrangler needs to be within the range of 13" - 18" which is measured to the bottom of the receiver opening. This is the case…

In order to use the Detail K2 Snowplow #K2AVAL8422, your front hitch must be between 13"-18" from the ground, when measured from the bottom of the receiver opening to the ground. We installed the Curt front hitch #C31018 on a 2012…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…