Draw-Tite Front Mount Hitch Receiver for Ford F-250 Super Duty

Question

Question:

I have a 2021 Ford F-250 Super Duty. I am looking for a front hitch.

asked by: Amy

0

Expert Reply:

I would be happy to help you find a front mounted hitch for your Ford F-250 Super Duty. I recommend the Draw-Tite Front Mount Trailer Hitch Receiver Item # 65076. This is a custom fit bolt-on installation with no welding required. A complete hardware kit is included. This hitch has a 2" receiver with a gross trailer weight of 5,000 lbs, a vertical load limit of 500 lbs and a line pull of 9,000 lbs. I have attached a picture and installation video of this Draw-Tite front receiver hitch both installed and being installed on a Ford F-250.

expert reply by: Jerred H

0

draw-tite front mount f-250
(click to enlarge)

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 6

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 7

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 10

Yes, they are if your axles are overslung and the springs sit on top of them. The SumoSprings Trailer Helper Springs for 5-8K Axles item #SS26MV will work with a triple axle set up. They do a great job of absorbing road shock while also working to…

view full answer...

Answer 11

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 12

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…

view full answer...

Draw-Tite Front Mount Hitch Receiver for Ford F-250 Super Duty

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching