Where is the etrailer Coupler Item # CA-5196-B Made?  

I recommend having the Demco A-Frame Trailer Coupler #DM14791-97 welded on in place of the Sleeve-Lock #CA-5196-B style coupler that you currently have. This Demco coupler uses a 2" hitch ball the same as your current coupler and is rated for up…

A trailer is always going to be limited by its weakest component. This means that even if everything else on the trailer (axle, hubs, wheels, suspension, etc) is rated for 7,000 pounds, you will still need to adhere to the 5,000 pound limit on the…

The Sleeve-Lock A-Frame Trailer Coupler #CA-5196-B was designed for attaching to the standard 50 degree a-frame channels found at the front of trailers. If you have a different angle that doesn't sit flush a better choice might be to go with a…

For your sleeve-lock coupler, I recommend the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches #3794DAT. This will give you the hitch lock, the coupler ball lock and the pin lock. This kit is the best kit…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…