Recommended Hitch and Wiring Harness for a 2021 Ford Explorer
Question:
I have a 2021 Ford Explorer without a tow package. I am looking for a hitch that can haul a 5,000 lbs double axle trailer. I would also like to use a brake controller.
asked by: Jeff
Expert Reply:
I would be happy to help you set up your 2021 Ford Explorer for towing. You're going to need a receiver hitch, wiring harness, brake controller, and ball mount kit.
For a receiver hitch I recommend the Curt Trailer Hitch item # CU78FR. This is a custom fit hitch that will attach to your Explorer's frame with no drilling. It is a class III receiver hitch with a maximum gross trailer weight of 6,000 lbs and a maximum tongue weight of 900 lbs.
For a wiring harness you are going to need two separate parts that work together to give you all the functions you will need to not only control your trailer's light functions but also the braking system. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118599. This wiring harness connects to existing wiring in the rear of your Explorer and does not require cutting, splicing, or tapping. This will provide you with control over your trailers lighting functions; brake, turn signal, and running lights.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect one wire to the blue wire on the brake controller and then connect one wire to the positive post on the vehicle's battery via the included 40-amp circuit breaker. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's reverse lights. I have linked a picture detailing and identifying the functions of each of the wires you will need to connect. I have also included a diagram to show you how these 2 wiring harness will be connected to your 2021 Ford Explorer and Boat trailer.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" Ball, a fixed ball mount with a 3/4" rise and 2" drop, and is rated for up to 7,500 lbs. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Brake Controller
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: no~drill mount for electrical mounting bracket
- Q&A: Adding a 7-Way Trailer Connector to a 2020 Ford Explorer Without Factory Tow Package
- Video: Trailer Wiring Harness Installation - 2018 Ford Explorer HM40975
- Shop: Curt Universal Wiring Harness for Vehicle-End Trailer Connectors
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: No-Drill Mount for Electrical Mounting Bracket - Short
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Search Results: brake controller
- Q&A: Parts Needed to Install and Use a Brake Controller on a 2021 Ford Explorer with Factory 7-way
- Q&A: Brake Controller Recommendation For 2021 Ford Explorer With Factory 7-Way
- Q&A: Recommended Trailer Hitch Receiver and Wiring Harness For Towing a Boat Trailer With a 2021 Explorer
- Q&A: Vehicle Wiring Harness For a 2021 Ford Explorer
- Search Results: 56093
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch wiring
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Crosstrek