Troubleshooting Loss of Power on the Furrion Vision S Backup Camera System

Question:

I had power in my 2021 Cougar half ton model 26 rks for the pre wire rear camera now no power. What can I check for. thank you

asked by: Robert

Expert Reply:

If you have recently changed towing vehicles you could potentially be looking at the tow vehicle being the source of your power issues on your Furrion Vision S Wireless RV Backup Camera System # FOS43TASF. Some of the newer model vehicles do not have enough power and need the 7-Way Vehicle Power Adapter w/ Power Switch # FR87PR which provides the additional power required for your Furrion Vision S RV observation camera system to function properly.

If you have not recently changed your tow vehicle you can check your 7-way connector to ensure that there is no corrosion on your leads and that your wiring is in operable condition. A Circuit Tester # PTW2993 can help with testing your 7-way and wiring. If your leads and wiring are good you can check to make sure the power cable is connected, ensure that the cigarette lighter has 12-24 volt DC power, and check the fuse in the cigarette socket adapter.

I have included a link to a wiring page that can assist you in troubleshooting your wiring.

expert reply by: Scott S