What Trax Rails Do I Need to Add to a RetraxPRO MX # RT80471 on My 2021 GMC Sierra 1500?

Question

Question:

What trax rails do I need to add them to a Retrax 80471 on my 2021 GMC Sierra 1500? I have a 5-3/4 ft. bed.

asked by: Mick

0

Expert Reply:

In order to add Trax rails to your RetraxPRO MX # RT80471, the Trax rails you need are the # RTX27FR. These rails will work on your 2021 GMC Sierra 1500 (with a 5-3/4 ft. bed).

expert reply by: Bob C

0

Answer 1

The 5 foot 8 inch bed of the 2018 Chevy Silverado 1500 is referenced as a 5-1/2 foot bed. The manufacturer just rounds the numbers for parts like a tonneau cover, but the covers will be tested to confirm a fit, so they have been tested to fit your…

view full answer...

Answer 2

The Longview Tow Mirrors part #LO54FR that you referenced that fit your 2021 Chevy Silverado 1500 are perfectly compatible with the puddle lights and camera setup. We've had customers come back and report that they worked well with those features…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I do see the BAKFlip MX4 Hard Tonneau Cover #BAK52FR you found is for a short CarbonPro bed on your 2024 GMC Sierra 1500 Denali. This will interfere with the 3rd brake light bed camera on your truck. I recommend looking at the Pace Edwards…

view full answer...

Answer 6

Then I do have some good news for you Rick. The BAKFlip MX4 Hard Tonneau Cover #BAK448130 will not block the camera on your 2024 GMC Sierra 1500 Denali short bed truck. This is the correct cover for your truck not having the CarbonPro bed.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...