Red LED Light That Fits 1 Inch Diameter Hole

Question

Question:

I am looking for a round smoke or red light that will fit into a 1 inch hole. Do you have anything like this? Trying to fit into a after market jeep bumper Thanks

asked by: Mike

1

Helpful Expert Reply:

We have a number of LED lights that fit a 1 inch diameter hole, for example the Peterson Piranha Mini LED Clearance or Side Marker Light w/ Grommet - 1 Diode - Round - Red Lens # M171R.

This is a 3/4" light but comes with a grommet that measures 1-1/16" in diameter so it will fit a 1" hole. I have added a link below to our entire selection of 1" diameter red LED lights for you to check out.

expert reply by: Kyle S

1

Answer 1

We do not have a seal that matches the inner and outer diameter you have provided. That being said, I believe the markings on the seal actually indicate that your ID is 1.25" and our OD is 1.979". Your measurements are incredibly close to…

view full answer...

Answer 2

The Optronics LED Trailer Tail light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens #STL72RB will use the PVC Grommet for 6-1/2" Oval Trailer Tail Lights #A70GB for mounting. With this combination the opening you need to cut is a…

view full answer...

Answer 3

The Optronics LED Light Strip Connector - Snap On #A90P1B has the following dimensions: 5/8" tall 13/16" length 9/16" width. 3/8" width of opening for connecting strips. These connectors allow you to connect multiple strands of…

view full answer...

Answer 4

Trailer makers do not maintain detailed specs on the smaller items like the lights they use in production of their trailers so you can refer to the linked page that displays all of our LED-type trailing lighting. Just click on the type of light you…

view full answer...

Answer 5

I do have an option for you but the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger part #PD4135K is a direct replacement for WFCO model 8735. I recommend the Replacement Converter for Parallax/Magnetek or…

view full answer...

Answer 6

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 7

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 8

Great question. Without cutting a hole you wouldn't be able to get enough clearance for the jacks to work. I would strongly recommend using them on the outside to prevent clearance issues and probable damage. However, I think you would be better…

view full answer...