eDream Deluxe Mattress Firmness Levels

Question

Question:

what is mattress firmness level? soft? medium? hard?

asked by: William R

1

Helpful Expert Reply:

The etrailer eDream Deluxe RV Mattress # e84FR is double-sided to allow you to choose between plush and firm sleeping surfaces. You can flip the mattress over for either side, depending on your personal preference. If you choose the "Plush" side you'd be getting a soft firmness level and for the "Firm" side a hard firmness level.

If you're looking for a more medium firmness you would want to get the # e94FR or # e97FR instead.

expert reply by: Kevin C

1

eDream Deluxe Firmness
(click to enlarge)

Answer 1

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the…

view full answer...

Answer 2

The best way to improve the handling and stability of your 2011 E-450 motorhome is going to be with a rear sway bar upgrade like the Hellwig part #HE78RR. This will make the biggest difference and honestly should be the first thing anyone with a…

view full answer...

Answer 3

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just…

view full answer...

Answer 4

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...

Answer 5

If there isn't a way to access it from the inner side of the frame or from the side then it would have a weld nut in frame and you would be able to just remove the bolt normally. There unfortunately isn't a guide that shows if there's a…

view full answer...

Answer 6

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 7

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 8

We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.

view full answer...

Answer 9

Yes, the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR would be a fit for a 2023 Ford E-450 chassis for a Class C motorhome.

view full answer...

Answer 10

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 11

Hey Scott, so we do have the SumoSpring Solo kit part #SSR-130-54 that is a confirmed fit for your 2018 Ford motorhome built on an E-450 chassis.

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

eDream Deluxe Mattress Firmness Levels

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching