Mighty Cord RV Power Cord Extension With Indicator Lights Specifications  

The Mighty Cord RV Power Cord Item #A10-5025ED90 is not available in a 50 ft. Since you are wanting 50 ft for your 2019 Cardinal 3850 5th Wheel, I recommend using the Mighty Cord RV Power Cord Adapter Item #A10-5050D90VP with the Mighty Cord RV…

Yes, you do have the right adapter for the Epicord 50 Amp Twist Lock Power Inlet #277-000139. To plug into the inlet and parallel kit you can absolutely use the Mighty Cord 90-Degree RV Power Cord Adapter - 50 Amp Twist Lock Female to 50 Amp Male…

The only way that you will be able to get your Mighty Cord RV Power Cord Adapter #A10-5050D90VP to hang straight down is if you're able to loosen up and rotate the RV receptacle. Some look like they might be easy to accomplish this while others…

It sounds like you already have a 50 foot power cord for your RV to hook up to shore power, the Epicord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector - 50' Long #277-000157. There is a simple solution to this by adding…

I spoke to my contact at Valterra and she confirmed that the Mighty Cord RV Power Cord Extension w/ Indicator Lights - 50 Amps - 50' Long #A10-5050EHLED is made of copper wiring.

We have two 50 foot long 50 amp power cord extensions. The Mighty Cord part #A10-5050E which is all black and the part #A10-5050EHLED which has lighted handles.

That is correct. There is nothing to support the bumper when you install the Curt Hitch item #C15398 on a 2013 Toyota Tundra. That hitch was designed for the trucks without the factory hitch so there's no reason for it to have built in support…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…