Will Two Battle Born Batteries Fit In The TorkLift TLA7700L Battery Box

Question

Question:

Will two battle born lithium batteries fit in this box?

asked by: Joe M

1

Helpful Expert Reply:

The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum # TLA7700L will have an internal dimension of 31-1/2" long x 10" wide x 11-3/4" tall. As long as 2 of the Battle Born batteries you are looking at does not exceed this dimensions, you will be good to go.

expert reply by: Lazer S

1

Answer 1

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 2

So the internal dimensions of the Torklift box part #TLA7700L that you referenced are 11-3/4 inches deep which is another way of saying tall. So since your battery is 11.02 inches tall this would easily be compatible. Since your width is 7.28 inches…

view full answer...

Answer 3

The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size. The box…

view full answer...

Answer 4

Great question, lets have a look at this unit and see what we can figure out. **Commercial Grade Battery Box for Group 8D Batteries - Vented #329-HM484. *TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum…

view full answer...

Answer 5

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 6

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 7

The fuses F36 and F37 are the ones to look at. These are located in the power distribution box under the hood in the rear passengers side. The likely missing fuse is F37 both both will require a 30 Amp cartridge fuse which will likely be pink.

view full answer...

Answer 8

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 9

When the brake pedal is depressed it will send out 12v power through the brake light switch wire to the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100, telling it to activate the brakes on the trailer.

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 11

The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both great brake controller options. The best option for you will be dependent on where you will be doing…

view full answer...