Availability Of Channel Nuts That Fit In Top Channel Of Rhino-Rack Vortex Aero Crossbars

Question

Question:

Are there any Rhino brand or compatible channel nuts that fit into the c channel of Rhino Vortex bars?

asked by: Scott S

0

Expert Reply:

We have exactly what you are looking for.

The Truck Rack Crossbar T-Slot Fit Kit # MPG8287 is an exact fit for the top channel in the Rhino-Rack Vortex Aero Crossbars such as the # RRVA137B-2.

This will give you four channel nuts which should be perfect for what you are wanting to try to do, as it is one for each corner of a two crossbar setup which is the most common.

expert reply by: Samuel C

0

Answer 1

Yes Thule roof carriers can attach to Rhino Rack roof racks like the part #RRVA126B-2 and #RRSX100 that fits your 2021 Kia Seltos.

view full answer...

Answer 2

Thankfully the top channel dimensions between roof rack companies is essentially the same so the channel-mount accessories easily fit between brands. So the Rhino Rack roof rack that fits your 2018 Volvo V60 with roof rails part numbers #RRVA126B-2…

view full answer...

Answer 3

For the Malone Downloader kayak carrier part #MPG114MD the hardware kit you'd need to fit it to a Rhino Rack top channel would be the part #MPG8287. The MegaWing does not have a similar adapter for it.

view full answer...

Answer 4

We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 #RRVA180B-2 Quick Mount Legs - RTC and…

view full answer...

Answer 5

The RotopaX RX-4G 4-gallon fuel container can be mounted to a Rhino-Rack Pioneer platform rack like #JA8548 using adapter kit #RR43203. This kit uses the rack's specialized channels as the mounting point. This kit would not work with a Yakima…

view full answer...

Answer 6

It sounds like you just need the track nut/channel nut (whatever you'd prefer to call it), and while they're not sold as singles you can pick up a pack of 4 with the RotopaX Pack Mount Adapter Kit for Rhino-Rack Pioneer Platforms #RR43203.…

view full answer...

Answer 7

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Availability Of Channel Nuts That Fit In Top Channel Of Rhino-Rack Vortex Aero Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching