Lippert Components Lift Kit for 2015 Forest River Fifth Wheel Trailer

Question

Question:

I have a 2012 Chevy Silverado 2500hd 4x4 6.5 bed lifted and pull a 2015 forest river wildwood WDF29RLW 5th wheel camper. I installed the convert a ball 7½off set to the kingbox and need to lift the camper so it will set level when towing it. What are my best and affordable options to achieve this. Thank you

asked by: Todd M

0

Expert Reply:

I recommend the Correct Track Trailer Alignment and Lift Kit item # RR23QX. This will give you a 1-1/4" or 2-1/4" lift to help you level out your Forest River fifth wheel trailer while pulling it behind your lifted Chevy Silverado.

expert reply by: Jerred H

0

rasing sundowner trailer chevy silverado
(click to enlarge)

Answer 1

We actually have a tandem axle Lippert lift kit for trailers with the part #RR23QX which would be your best option.

view full answer...

Answer 2

Congrats on the new truck! There are a couple of options to lift your 2020 Montana High County depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track…

view full answer...

Answer 3

The Lippert Components Standard Axle Lift Kit part #LC425750 is compatible with any trailer that uses standard leaf spring axles whether it's made by Lippert or Dexter. The kit is designed for single axle applications.

view full answer...

Answer 4

You are correct saying that the leaf spring can stretch a bit over time, and it sounds like that is exactly what happened; you need a 26" (eye to eye) double-eye leaf spring. I recommend going with the 6-Leaf Double-Eye Spring for 6,000-lb…

view full answer...

Answer 5

The Keystone Hideout 262LHS has leaf spring axles which are overslung meaning they are under the leaf springs. Therefore you already really have the setup with the most amount of ground clearance but there is one other thing you can do which is to…

view full answer...

Answer 6

Are you sure you aren't exceeding the capacity of your trailer? Going with higher rated springs will give you additional spring capacity but will not increase the overall capacity of your trailer. The only way going with new leaf springs like…

view full answer...

Answer 7

We have a 6-leaf 6k axle leaf spring with part #e94SR you could use on your 2016 Cruiser Lite 5th wheel that would give you a little more height. These are 26 inches long which is a really common size.

view full answer...

Answer 8

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...

Answer 9

Since your axles are only 3,000LB capacity I recommend the Equa-Flex Cushioned Equalizers #LC279687 as they are rated for 3,000-6,000lb axles. And as you said the dimensions better match your current equalizers. The Road Armor Shock Absorbing…

view full answer...

Answer 10

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 11

The correct Reese Goose Box to replace the factory Lippert 1716 model on your Cedar Creek Trailer is the part #RP94716-61301, This is essentially the Reese #RP85FR Goose Box that you were looking at but with an added spacer kit to make it compatible…

view full answer...

Answer 12

I reached out to my contact at Lippert and the Lippert Components Standard Axle Lift Kit #LC425750 will work just fine with your 5100lb Lippert Standard Single Axle. The #LC425750 does not have a weight capacity itself, much like how a hanger kit…

view full answer...

Lippert Components Lift Kit for 2015 Forest River Fifth Wheel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching