Replacement Steel Cover And Glass Top For Furrion 2-In-1 Range Oven

Question

Question:

We only see model FSRE21SA-SS on your website. We need model FSRE17SA-BL. Do you carry this replacement glass top cover also?

asked by: Mike S

0

Expert Reply:

The correct replacement for # FSRE17SABL is the Replacement Stainless Steel Top with Glass Cover for Furrion 2-in-1 Range Oven # C-FSRE21SA-SS-003, this part comes with the glass top. Unfortunately the black option part # FSRE17SABL has been discontinued, however the stainless steel option part # C-FSRE21SA-SS-003 will fit just fine.

expert reply by: Bryce D

0

Answer 1

For your Furrion FGH3Z25BL (NO LONGER AVAILABLE) three-burner, propane cook top you will need to order the Furrion #C-FSRE21SA-SS-003 replacement stainless steel top with glass cover in order to get the glass. I contacted Furrion and they do not sell…

view full answer...

Answer 2

The Replacement Glass Top for Furrion 2-in-1 Range Oven part #C-FSRE21SA-SS-003 is what you need to replace the glass top on a Furrion 2-in-1 Range Oven (FS17WB4A-BL) which is the same as our Furrion 2-in-1 Range Oven part #FSRE17SABL that is now…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 8

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

view full answer...