What Lock Will Work for a Gooseneck Trailer

Question

Question:

How do I tell which lock will fit my trailer?

asked by: Kasey

0

Expert Reply:

In order to choose the correct lock for your trailer, you will need to measure the outside diameter of the coupler and also the outside diameter of the lip at the bottom of the coupler. From there, I have linked the page with all of the gooseneck locks available.

If you have the manufacturer and part number of the coupler, I can be more specific with a recommendation.

expert reply by: Lori W

0

Answer 1

I searched online for your 2018 Big Tex and found a picture of it with the EZ Lock Gooseneck Coupler Lock Combo #BLTL-53-40D2 installed so we know this will work well for you!

view full answer...

Answer 2

The Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-55-40D per Kaufman is the correct lock for you. If you need the set screw as well then you will need the #BLTL-57-40D2. This kit includes both the lock for coupler section and the set screw you will…

view full answer...

Answer 3

To run a second AC unit you're going to need a 50amp system to power both AC units at the same time. I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - White Item #FR55PV as it's the best overall unit…

view full answer...

Answer 4

They must have been talking about bumper pull trailers because there is no safe or sane way to pull a gooseneck trailer using the safety chains. The trailer would topple over or slide into the thief's vehicle. The best way to prevent someone from…

view full answer...

Answer 5

Thank you for the photo of your coupler. When choosing a lock for the coupler it makes it much easier if you are able to identify the coupler manufacturer. The Blaylock EZ Lock Gooseneck Coupler Lock, part #BLTL-55-40D is designed to fit RAM…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, there is. To add a gooseneck hitch to your 2023 Chevy 2500, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch item #BWGNRK1020. This kit includes custom brackets that mount in preexisting holes in your trucks frame. This…

view full answer...

Answer 9

The EZ Lock Gooseneck Coupler Lock Combo #BLTL-53-40D2 will work well for your Bulldog Gooseneck Adjustable Coupler #BD0289250300. Unfortunately we have not yet had a chance to test the lock on a 0289340317 coupler to be sure of the fit. I have…

view full answer...

Answer 10

Yes, the EZ Lock Gooseneck Coupler Lock Combo part #BLTL-53-40D2 will work with a Bulldog gooseneck coupler. I have attached a photo of the above lock installed on a Bulldog gooseneck coupler for you as well. The EZ Lock Gooseneck Coupler Lock Combo…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

What Lock Will Work for a Gooseneck Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching