How Do I Remove the Fan Blade Assembly on My Fan-Tastic Vent 50004bt?

Question

Question:

How do I remove fan blade assembly from the inside, my fan does not have a phillips head on the bottom, there is a side slot on the fan itself is this for an allen wrench if so what is the size of the allen wrench?

asked by: Tom

0

Expert Reply:

I went ahead and reached out to my Tech at Dometic (the manufacturers of Fan-Tastic Vent), and he confirmed that in order to remove the fan blade assembly on your model 50004bt, you will need to remove the vent from outside of the coach. From the outside, you can easily remove the fan without any specialized tools. You cannot remove the fan blade assembly from the inside of the coach.

expert reply by: Bob C

0

Answer 1

The fan motor found in #FVK8017-00 is the right part to fix your problem, regardless of which direction the air is going, this is the motor you need. It also includes a new bow-tie bracket and blade, should you also need to replace those at some…

view full answer...

Answer 2

There are replacement motor parts for the Fanastic Fan Vents such as part #FV801250 but the motor part #B2000RBT is a replacement part for MaxxAir roof vents. To replace the motor in your Fantastic Vent you need part #FVK8017-00 which replaces the…

view full answer...

Answer 3

I spoke with my contact at Fan-Tastic Vents and she verified that the part #FVK8017-00 is a replacement for your 4000 can style motor. She said they actually have this listed as a fit in their system so you are good to go!

view full answer...

Answer 4

The Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 is what you need to replace your current motor.

view full answer...

Answer 5

Thanks for the picture of your roof vent. From that I can tell that the motor part #FVK8017-00 that you referenced is the correct replacement.

view full answer...

Answer 6

To remove the fan blade of a Fan Tastic Roof Vent #FV802250 you will need to first remove the screen on the underside. You will want to then remove the vent cover lid from the outside of the trailer as well. There are four screws from the top of the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 12

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

How Do I Remove the Fan Blade Assembly on My Fan-Tastic Vent 50004bt?

Product Page this Question was Asked From

Continue Researching