Replacement Hardware Needed For Curt Trailer Hitch Receiver on a 2012 Honda Odyssey

Question

Question:

I already have this hitch and install kit but what I need are two more of the square hole spacers that come with this kit. How can I get them. Thank you.

asked by: Seth W

0

Expert Reply:

Currently we offer the Replacement Hardware Kit # RHK that will have all the hardware you need for the Curt Trailer Hitch Receiver # C13068 on your 2012 Honda Odyssey. We do not offer the parts of the hardware kit separately.

When you order the hardware you need to identify that it is for the Curt Receiver # C13068 on the window when ordering online.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jimmy! It looks like the Vantage Mobility Northstar Packages don't alter the rear end of the 2015 Honda Odysseys. You will want to confirm this because all of our available hitches are set up for unaltered factory set ups. If this is the…

view full answer...

Answer 4

Hey Gregory, thanks for reaching out! To kick things off your 2015 Honda Odyssey will need a 4-Way connector. If you don't already have one then I highly recommend the T-One #118521 because of how reliable it is. Next step is to install the…

view full answer...

Answer 5

The bolts that come with the Draw Tite hitch part #36417 are size M12 X 1.25 X 35mm CL8.8 Bolt. The size thread tap you'd need is M12x1.25mm. I attached a few help articles on tapping threads for you to check out as well.

view full answer...

Answer 6

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Answer 7

Thule has a Wingbar Edge roof rack that fits your 2022 Toyota Highlander with the part numbers #TH69FE, #TH29SC, and #TH22R. This is the most versatile and quietest roof rack available for your vehicle.

view full answer...

Answer 8

Thanks for the pictures! The Curt Trailer Hitch Receiver item #C13381 you were looking at is a confirmed fit for all models of the 2022 Volkswagen Tiguan. It looks like VW has added some extra trim pieces for the R-Line model. Those will need to be…

view full answer...

Answer 9

The #e98840 etrailer Trailer Hitch Receiver has a maximum gross towing weight of 6,000 lbs and tongue weight of 900 lbs. As long as the boat you are towing does not exceed these weights the hitch will not have any issues. If you are towing a larger…

view full answer...

Answer 10

A colleague has a 2010 Honda Pilot so I went out to check on opening the auxiliary fuse box door and then the cover behind the door. In the instructions linked below, the manufacturer of T-One Connector with Upgraded Circuit Protected ModuLite,…

view full answer...

Answer 11

I see you ordered a class 1 1-1/4" trailer hitch receiver for your 2015 Toyota Prius so you will want to make sure you buy a bike rack that is also compatible with that receiver. The Inno Tire Hold 1 Bike Platform Rack - 1-1/4" and 2"…

view full answer...