Recommended Bike Rack For A 2009 Mazda 6 With Curt Class 1 Hitch

Question

Question:

I have a similar question to the question about the Swagman economy platform being mounted on a Mazda 6. You directed the questioner to a Drawtite trailer hitch which is listed as a Class 1 hitch. I have a Curt class 1 hitch on a 2009 Mazda 6 but the Swagman rack on your site says its for class 2 and 3 hitches. Is that accurate? Can it not be used on a Class 1 hitch?

asked by: Eric U

1

Helpful Expert Reply:

The Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches # S64650 is rated for use on class 2 or 3 trailer hitches but unfortunately there are only class 1 trailer hitch receivers available for a 2009 Mazda 6. This bike rack will not work with class 1 hitches like your Curt # C11359.

You would instead need a bike rack like the Saris Freedom Bike Rack for 2 Recumbents Bikes - 1-1/4" and 2" Hitches - Frame Mount # SA4412B-R. This rack is rated for use on a class 1 hitch, but only has a per bike weight capacity of 35 lbs when used on a class 1 hitch.

If your bike weighs more than 35 pounds, you could look at the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount # TH903202. It will work with your class I hitch and holds 2 bikes up to 65 pounds.

The ratcheting hooks on center mast hold bikes securely by the frame and come with keyed-alike locks to prevent/deter theft. It has adjustable wheel hoops slide back and forth to eliminate bike-to-bike contact and uses hand knobs for easy adjustments.

expert reply by: Kevin C

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 12

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...