What Does DeeZee Specialty Series Trailer Tongue Tool Box # DZ91717P Weigh

Question

Question:

I am not seeing the weight on the specs. I see the Buyers box is 21 lbs. What is this one?

asked by: Greg M

0

Expert Reply:

The DeeZee Specialty Series Trailer Tongue Tool Box # DZ91717P weighs 28 lbs.

expert reply by: Jameson C

0

Answer 1

The DeeZee Specialty Series Trailer Tongue Toolbox, #DZ91717P, is 36 inches wide at the back of the box. I have attached a picture showing the dimensions of this box for you. You mention the specs showing 30 inches but I am not sure where that…

view full answer...

Answer 2

The installation process for a toolbox like the DeeZee #DZ91717P on your V-nose is just going to depend on the mounting space you have available. This toolbox includes hardware and it can be installed by simply drilling four 3/16 inch holes through…

view full answer...

Answer 3

We have the DeeZee Specialty Series Trailer Tongue Toolbox - A-Frame - Plastic - 6 Cu Ft - Black #DZ91717P or aluminum options like #DZ91717 or #350975. I've attached a link to all of your options so you can see the different sizes available. I…

view full answer...

Answer 4

The capacity is 2,000 lbs per track for the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long #e42VR. The weight capacity is per track, so using two of them side-by-side will give you a 4,000 lb capacity. So yes it…

view full answer...

Answer 5

In the video for the older toolbox MT80349 it looked like it opened to 90 degrees but it is sort of an optical illusion. Seen from the side you can see that it did not open a full 90 degrees. DeeZee box #DZ91717P does open a full 90 degrees. I have…

view full answer...

Answer 6

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 7

The hinge of the DeeZee Specialty Series Trailer Tongue Toolbox part #DZ91717P is located on the back edge of the toolbox so you would not be able to mount this box flush to the front of your trailer. You will need to mount the box a few inches in…

view full answer...

Answer 8

The etrailer e-track system #e42VR will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals.…

view full answer...

Answer 9

I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic corrosion…

view full answer...

Answer 10

According to my research the CellTech trailers looked to have vertical etrack installed directly to the walls, but since you're trailer has the honeycomb paneling that isn't solid all the way through you'll need to install some studs to…

view full answer...

Answer 11

The trailer does not have to match the dimensions of toolbox #DZ91717P. As long as you have the space somewhere to mount it you are good to go. I have linked a video showing an example installation for you.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What Does DeeZee Specialty Series Trailer Tongue Tool Box # DZ91717P Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching