How To Determine If Your 2020 Kia Sorento Has A Factory Towing Package

Question

Question:

How do I know if my 2020 Kia Sorento has a tow package

asked by: Dwight S

0

Expert Reply:

To determine if your 2020 Kia Sorento has a towing package you'll need to remove the sidewall panel just behind the rear driver's side wheel well. Inside you'll find a wiring harness connector that will allow you to plug in a tow package ready trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56332.

If you do not have an open wiring harness plug there then you do not have the factory tow package and will have to instead install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118583.

Tekonsha is known for being a very reliable brand for trailer wiring harnesses and trailer brake controllers and is one of our top selling brands.

expert reply by: Kevin C

0

Factory Trailer Wiring Harness
(click to enlarge)

Answer 1

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 2

When it comes to installing a trailer hitch onto your 2023 Kia Sorento I recommend the etrailer brand #e28AR Class III hitch because the installation of the hitch is very easy, pretty much have to just raise it into place and insert the bolts. Once…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C34ER is confirmed to fit your 2022 Kia Sorento PHEV. This is a Class III hitch with a 2" receiver. It features a bolt-on installation and comes with a limited lifetime warranty. If you plan on doing some…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I looked up the towing capacity of your 2016 Kia Sedona and it looks to have a towing capacity of 3,500 lbs so a 2,700 lb camper would be no problem at all. For a hitch you then would want the Draw Tite part #75894 which is a confirmed fit. I…

view full answer...

Answer 6

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will…

view full answer...

Answer 7

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Since your 2024 Kia Telluride has LED taillights, the correct 4-way wiring harness is the following: - Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 Then if you need a trailer hitch use the Trailer Hitch Receiver #e45ZR.

view full answer...

Answer 10

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not. If you check out the attached picture you can see what wiring will be in this location for the tow package…

view full answer...

How To Determine If Your 2020 Kia Sorento Has A Factory Towing Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching