Tekonsha T-One Vehicle Wiring Harness Installation - 2020 Kia Sorento Video

To determine if your 2020 Kia Sorento has a towing package you'll need to remove the sidewall panel just behind the rear driver's side wheel well. Inside you'll find a wiring harness connector that will allow you to plug in a tow package…

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not. If you check out the attached picture you can see what wiring will be in this location for the tow package…

For your 2019 Kia Sorento EX without the tow package I recommend the Tekonsha wiring harness, part #118583, because it has a higher amp draw than the other custom harnesses available. It plugs in behind both tail lights and only has one wire that…

The trailer tongue is the portion of the trailer that extends out from the main body up to the coupler (which is what hooks up to the hitch ball on the tow vehicle). The axle is the tube that runs across the trailer that has the hub, wheel, and tire…

Absolutely, you can check just behind the rear tire on the driver's side of your 2019 Kia Sorento, on the outside of the frame rail. The factory connector, if present, will look like the one in the attached photo (B). Note that you will need to…

Yes, we do have a 4-way wiring harness for your 2023 Kia Sorento. I recommend the Tekonsha T-One Vehicle Wiring Harness item #118269. This custom fit wiring harness plugs into your Sorento's factory tow package behind your driver's side rear…