Trailer Hitch that Fits 2020 Honda CR-V Hybrid

Question

Question:

Do you have a trailer hitch to fit a Honda CR-V hybrid 2020

asked by: Sherry M

0

Expert Reply:

Yes we have the etrailer hitch part # e98848 that fits your 2020 Honda CR-V hybrid. This is a mostly hidden hitch with a 2 inch opening that I attached an install video for to this page.

expert reply by: Jameson C

0

Answer 1

We have checked with the manufacturer on this in the past. We have confirmed that the Draw-Tite class 3 hitch #DT79MR will fit the 2024 Honda CR-V hybrid. This is a class 3 hitch with a 2" receiver. We have also confirmed fitment with several of…

view full answer...

Answer 2

The best trailer hitch receiver for your 2021 Honda CR-V (which fits all models, including your Sport), is the following: - Draw-Tite Trailer Hitch Receiver #DT79MR There's a couple of reasons for that, starting with the fact it has excellent…

view full answer...

Answer 3

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 4

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Answer 5

Sometimes we've heard that someone can get the sensor to pick up their foot to either side of the hitch receiver, like the etrailer #e98848 for your 2021 Honda CR-V Touring, but this isn't a concrete thing and can be hit and miss as…

view full answer...

Answer 6

The Draw-Tite #36597 Class I hitch will only hinder the sensors in the center of the bumper, where the receiver tube will block them. If you wave your foot to the left or right of the receiver tube by a foot or so, the sensors will pick up the…

view full answer...

Answer 7

Some trimming of the rear fascia on your 2020 Honda CR-V is indeed required when installing the etrailer Trailer Hitch Receiver #e98848 to allow clearance for the drop-down receiver. You will just need to use some shears/snips to trim about 3" x…

view full answer...

Answer 8

Yes, we have since been able to confirm the etrailer Trailer Hitch Receiver part #e98848 will fit a 2021 Honda CR-V Hybrid after some confusion early on. There have been multiple reviews from our customers stating it was compatible. I have attached a…

view full answer...

Answer 9

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 10

Curt manufactures the #e98848 hitch for us. They don't list the hitch as a fit for the hybrid model, but we have successfully installed the hitch on a hybrid model and several of our customers have provided feedback that it's a confirmed fit.…

view full answer...

Answer 11

I attached a link to an install video for the etrailer hitch part #e98848 on a 2021 Honda CR-V just like you hybrid model that would walk you through entire install. I also attached a link to the install instructions as well. Any qualified shop near…

view full answer...

Answer 12

To trim the fascia on your 2021 Honda CR-V to allow the etrailer Trailer Hitch Receiver #e98848 fit our installers have found a dremel is the best option as it allows for a very precise cut and is easy to use. You can see Conner using a dremel at the…

view full answer...