How Do You Reset the Progressive Dynamics Converter # PD9260C?

Question

Question:

Trying to find a way to reset the unit

asked by: Garycase

0

Expert Reply:

I reached out to my contact at Progressive Dynamics, and he confirmed that there is no factory reset setting button on the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9260C. However, he recommended that you unplug it from the wall outlet and remove the dc wires. Once the wires are removed, you will then need to reconnect the dc wires and plug it back in. This should reset the converter.

expert reply by: Bob C

0

Answer 1

When you installed your Progressive Dynamics RV Power Control Center #PD4135K did you insert your DC fuses into the ports to complete the DC side of the installation? If you did I recommend doublechecking that they haven't been blown.…

view full answer...

Answer 2

In order to run both AC outlets and DC lights off shore power in your ATC Enclosed Trailer you will actually need a AC/DC distribution panel, not a power converter. For this, I recommend using Progressive Dynamics Inteli-Power AC/DC Distribution…

view full answer...

Answer 3

For a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 4

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

view full answer...

Answer 5

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 6

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion…

view full answer...

Answer 7

Although the Tekonsha Prodigy P3 #90195 and Primus IQ #TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The…

view full answer...

Answer 8

For you 2024 GMC Sierra 2500 AT4 that has a 3 inch lift I would go with the Roadmaster sway bar part #RM25FR as it's slightly thicker than the Hellwig that also fits your truck which will be helpful since lifted vehicles have a higher center…

view full answer...

Answer 9

I did a little research on your 2001 Dodge Ram 3500 and found that it's max towing capacity is listed as 13,900 lbs. I would strongly recommend you check the owners manual of your truck to see what Dodge lists as the capacity for your truck…

view full answer...

Answer 10

I believe we have just about everything you need, ideally we'd need you to measure your center bolt and u-bolts to make sure the here will fit. So, for a center bolt you can use the Leaf Spring Center Tie Bolt with Nut #38-3TB which…

view full answer...

Answer 11

We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a…

view full answer...

Answer 12

For a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

How Do You Reset the Progressive Dynamics Converter # PD9260C?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching