Is # LC182851 the Correct Bevel Gear Set for a Happijac 4150 Model?

Question

Question:

Is LC182851 the correct gear set for a Happijac 4150?

asked by: Shirley K

0

Expert Reply:

Yes, the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems # LC182851 is confirmed to fit your Happijac model 4150.

expert reply by: Bob C

0

Answer 1

I've attached instructions to this question to give you a getter look at replacing the Bevel Gears #LC182851 in your HappiJac #LC736514 #LC736515. Unfortunately, I do not have a video for you but the instructions do provide good pictures. First…

view full answer...

Answer 2

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 3

The clicking you described hearing on your Happijack 4150 System along with the fact that they aren't raising or lowering the camper might actually be the result of a weak power source. I first recommend simply checking to make sure that the…

view full answer...

Answer 4

Yes, I reached out to my contact at Lippert and they confirmed that the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems #LC182851 will work with your 4160 model jacks.

view full answer...

Answer 5

I went ahead and reached out to HappiJac, and they were able to determine that based off of the age of your jacks, the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems #LC182851 will not work for you. Instead, they are recommending that…

view full answer...

Answer 6

I reached out to my contact at Lippert and was able to verify that the Replacement Bevel Gears #LC182851 you referenced are confirmed to work on your HappiJac 4500 model system. This kit will work perfectly as a replacement.

view full answer...

Answer 7

We do have replacement mounting hardware for the Aries Grille Guard on your 2008 Toyota 4Runner. If you have the #AA2058 the correct brackets and hardware are the #AABRKT-2058. If you have the #AA66XB then you need the #AABRKT-2066.

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I checked the manual and also reached out to Blue Ox to confirm this but found no notes and Blue Ox stated that the Blue Ox Base Plate Kit #BX1739 would be a compatible fit for your 2020 GMC Sierra 3500 (diesel). If you haven't picked out the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is # LC182851 the Correct Bevel Gear Set for a Happijac 4150 Model?

Product Page this Question was Asked From

Continue Researching