Which Replacement Tarp Do I Need for My Extang Trifecta on My 2012 Toyota Tacoma 6-Ft. Bed?

Question

Question:

Hello Can you confirm if your ex68fr will fit my 2012 extended cab which has a 6 ft bed ? I am not sure what model of Trifecta I have and unfortunately I don't know the serial number. Thank You

asked by: Andy

1

Helpful Expert Reply:

I have an answer for you. Unfortunately, if you have a 2012 Toyota Tacoma with (6-ft. bed), the Replacement Tarp EX68FR will not fit your truck. However, since you do not have the serial number, we have a couple options for your replacement. If you purchased the cover around the time you bought the truck, I confirmed with Extang that you will need Replacement Tarp EX43915B. This cover is a replacement for the original Trifecta. If you purchased the cover more recently (after 2017), the replacement tarp you need is the # EX92915-20.

Unfortunately, without the serial number or part number, we cannot confirm which version of the Trifecta you own for your 2012 Toyota Tacoma.

expert reply by: Bob C

1

Answer 1

There are two factors in determining which replacement tarp you need. The first is the size of your 2012 Toyota Tacoma's truck. The Extang Trifecta was made for the 5 foot bed and the 6 foot bed. The second factor is if you have the standard…

view full answer...

Answer 2

We do carry the replacement tarp for the the Extang Trifecta 2.0 Soft Tonneau Cover part #EX92915 for a 2011 Toyota Tacoma short bed which is part #EX92915-20. Please let me know if you have the 5 foot bed version of the Trifecta 2.0 or any other…

view full answer...

Answer 3

Assuming your Trifecta is a 2.0 model, if your original Tonneau cover is part #EX92430 for a short bed truck the replacement tarp is part #EX89VR. If your Trifecta 2.0 #EX92435 is for a long bed truck, the replacement tarp is #EX62FR. If you…

view full answer...

Answer 4

The correct replacement tarp for a 2011 Toyota Tacoma 6' Bed with Extang Trifecta 2.0 Soft Tonneau Cover is part #EX92915-20.

view full answer...

Answer 5

I spoke with my contact at Extang and they told me the correct replacement tarp you need is the part #EX6900.

view full answer...

Answer 6

I may have a solution for you, but the 52915 was not a number we could associate with an Extang tonneau cover for a 2011 Toyota Tacoma. Is it possible the number actually is a 92915? That number corresponds to the Extang Trifecta 2.0 Soft Tonneau…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...