Parts Needed to Install a Prodigy P2 Brake Controller on a 2003 Chevy Silverado

Question:

1. Do you have an install video for this vehicle? 2. What is the correct part number for the wiring harness? 3. Where do I find if it has factory wiring and where is the plug located?

asked by: Lewis G

Expert Reply:

To see everything you will need to do to install a Prodigy Brake Controller # 90885 on your 2003 Chevy Silverado you will want to check out the FAQ article I attached.

If you have a factory 7-way at the rear of your vehicle you will simply need a Tekonsha Plug-In Wiring Adapter # 3015-P and then you will need to plug that into the port under your dash to complete the install. The port will be under your dash in a junction box to the left of the brake pedal.

If you do not have a factory 7-way you will need to do some more wiring. To see what is required check out the FAQ I attached. Basically you will need a Universal Brake Controller Install Kit # ETBC7.

I attached install instructions for the # ETBC7.

To see an install video check out the link I provided.

expert reply by: Jameson C