Replacement/Upgrade Submersible LED Trailer Tail Light

Question

Question:

If I am using a single combination tail light on the rear of my trailer for Stop/Turn/Tail is the light required to flash while braking?

asked by: John P

0

Expert Reply:

The LED Trailer Tail Light, # 328-003-6019R, that you have linked to is a round surface mounted LED light that is DOT and SAE compliant, meeting FMVSS 108 requirements for automotive lighting. This light will increase in its brightness when brakes are applied. I suggest you inquire with governing authority in your area for understanding what is required by law but my knowledge, to pulsate is not required by law.

expert reply by: Michael R

0

Answer 1

I checked with Command Electronics and they do not offer a replacement lens for the LED Trailer Tail Light part #328-003-6019R because it is a sealed unit therefore your only option is to replace the entire assembly but this will be super easy as it…

view full answer...

Answer 2

I looked up your 2016 Rpod 179 and the #328-003-6019R light looks a lot like what you have. I can't be sure without measuring your light but this one is 5-3/8 inches in total diameter. The mounting holes are also 4-1/8 inches apart on center.…

view full answer...

Answer 3

The LED Trailer Tail Light #328-003-6019R that you referenced is sold individually. If you needed a pair of these you'd need to order a quantity of 2.

view full answer...

Answer 4

These #328-003-6019R lamps are sold individually, so the quantity would be 1. Command makes an excellent product, these LED lamps are nice and bright for high visibility and are extremely well built to withstand shock. You can see a product…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Replacement/Upgrade Submersible LED Trailer Tail Light

Product Page this Question was Asked From

Continue Researching