Weight of DeeZee Specialty Series Underbody Tool Box DZ75

Question

Question:

What is the weight of this aluminum tool box ?

asked by: Shawn B

0

Expert Reply:

The weight is 40 lbs for the DeeZee toolbox you asked about, which is the following part number:

- DeeZee Specialty Series Underbody Tool Box # DZ75

This is a smart choice for a tool box as its underbody design allows for out of the way mounting, it locks for security, and is water tight so your cargo is safe from the elements. The only other thing you will need for this tool box is a mounting kit:

- DeeZee Mounting Kit for Underbody and Side-Step Toolboxes # DZDB-2502

expert reply by: Kyle S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You were on the right track already with the #41990 for your 2010 Mitsubishi Fuso FE145. There are no custom fit hitches so a universal weld-on is the only option. We have the #41990-07 that comes with 7" brackets, the #41990-16 with…

view full answer...

Answer 3

In order to determine if you can tow a car behind your Mitsubishi Fuso FE180 with lift gate you will need to check the owner's manual to determine the towing capacity for your specific model and configuration. Assuming the truck has the capacity…

view full answer...

Answer 4

The 1992 Chevy C/K Series 1500 did not come with a port for a brake controller. Instead, you will need to hard wire the brake controller by first installing a 4-Way, #118315, and then installing a 7 and 4 Way Installation Kit, #ETBC7. If the Truck…

view full answer...

Answer 5

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Answer 6

For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…

view full answer...

Answer 7

Unfortunately, we do not show the brackets installed on a truck because they are a universal fit and can be used in so many different ways to secure the toolbox. I called my contact at DeeZee about the installation of the DeeZee Toolbox, part…

view full answer...

Answer 8

The 2-Pole Socket Connector #PK12801 that you referenced would be internally waterproof but uses exposed terminals so it's not ideal for applications where it would get submerged but in standard outside applications it would do fine exposed to…

view full answer...

Weight of DeeZee Specialty Series Underbody Tool Box DZ75

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching