B and W Gooseneck Hitch for 2022 GMC Sierra 2500 Short Bed for Use with Companion Hitch

Question

Question:

I am looking at buying a 2022 GMC 2500. I dont see that there is a compatible BandW Gooseneck available. I already have the BandW fifthwheel hitch that installs in the Gooseneck. Is the Curt Gooseneck compatible with the BandW fifthwheel?

asked by: Jason

0

Expert Reply:

Since we know there were no changes to the 2022 GMC Sierra 2500 we know that the B and W Turnoverball gooseneck part # BWGNRK1020 does fit your truck and would allow you to use your Companion hitch part # BWRVK3400.

expert reply by: Jameson C

0

Answer 1

When installing the B&W Turnoverball #BWGNRK1020 on a truck with an 8 foot long bed your hole location will be at 45-5/16" from the edge of the bed closest to the tailgate. I've also linked one of our helpful installation…

view full answer...

Answer 2

The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs, part #BWGNRK1020, is my recommended gooseneck hitch. This is a custom gooseneck hitch for your 2022 Chevrolet Silverado 2500. It has a weight…

view full answer...

Answer 3

Yes, the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 is specifically made to fit your new 2020 Chevrolet Silverado 2500 with either a short (6.5 foot) or long (8 foot) bed so long as it's not already equipped with…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

B and W Gooseneck Hitch for 2022 GMC Sierra 2500 Short Bed for Use with Companion Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching