Will The Kuat Switch 6 Ski and Snowboard Carrier Fit Roof Rack On 2020 Subaru Outback?

Question

Question:

Will this fit on a Subaru Outback 2020 limited .

asked by: Gena S

0

Expert Reply:

The Kuat Switch 6 Ski and Snowboard Carrier # KU44FR has been confirmed to fit the standard factory roof rack for the Subaru Outback. So if your 2020 roof rack is the same style as seen in the attached demonstration video then it will fit; but since you have the limited trim level you may have a different roof rack setup.

I recommend measuring the width of your crossbars to verify compatibility. If the crossbars are less than 4-1/4" wide then this carrier will fit.

expert reply by: Andrew N

0

Answer 1

Tire chains do come in several varieties and some need more space within the wheel wells than others in order to operate safely. There are actual chains like #TC1138 and also the "spring chain" or cable type such as #PW1038 which require…

view full answer...

Answer 2

The stock tire on your 2013 Subaru XV Crosstrek is 225/55-17 and for this size we do offer a range of low-profile S-Class chains that are designed specifically for passenger cars that may have limited clearance in the wheel wells. I reviewed an…

view full answer...

Answer 3

According to the owner's manual for the 2014 Subaru XV Crosstrek you cannot use tire chains on the vehicle. The problem with is that chains are required by law in some areas. This is the Tire Chain Paradox or Reno's Law. The bottom line…

view full answer...

Answer 4

The length of the pad of the Kuat Switch part #KU44FR which holds the skis and boards measures 31-3/8 inches.

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...