bing tracking image
Q & A Icon

Recommended Weight Distribution System for 7,500 Lb Trailer  

Question:

I have a 2009 GMC 2500 HD Deisal Duramax and will be pulling a 28foot Airstream trailer. Tough wieth is about 1,000lb, trailer weight 7,500 lbs max weight. Tring to detemine the best sway bar / wieght distribution setup. I dont want to drill holes in the trailer tougue. worried about structural intregrity On the underside of the trailer tougue there is tubing for the propane so a clamp on sway attachment would need to allow room for the tubing. Thoughts?

0

Expert Reply:

The typical tongue weight for a trailer with 7,500 lb GVWR will be between 750 lbs and 1,125 lbs. Therefore, the Curt TruTrack Weight Distribution System part # C17500 which is rated for 1,000 lbs would be ideal. This system has clamp-on frame brackets so there's no drilling required. It has integrated sway control and an included hitch ball which comes pre-torqued.

In regards to the propane line you'll have to bend or relocate this if it's in the way but there not much else you can do about that for any system.

expert reply by:
0
Conner L

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>