Recommended Adapters To Install JTs Strong Arm Stabilizer LC191025 On TT With Electric Jacks
Question:
I have two questions. What points do I measure from to determine if it less than 58 inches or more than 58 inches? Second question, I have electric stabilizer jacks and I know I need the adapters that I have seen referenced. If this kit comes with 6 stabilizers it looks like I put 2 on the back and 4 on the front. Is that correct and how would I do that on the front? I reviewed all the QandA and didnt see this asked or answered. Thanks
asked by: Kevin O
Helpful Expert Reply:
I would be happy to help!
To determine if you need the JT's Strong Arm Kit For Under 58" or Over 58" you will measure the distance between your stabilizer jacks.
The # LC191025 you were looking at include six stabilizers and is for travel trailers so this is the correct kit for your trailer.
To connect these to the electric jacks on your trailer you will need two of the adapter kits # LC314597.
You are correct that two of the stabilizers are for the rear jacks, and four stabilizers are for the front jack. How this gets attached is dependent on the specific jacks on your trailer but you can see how we installed the extra tubes by checking out the included install video.
Products Referenced in This Question
Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits - Qty 4
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Stabilizers
- Lippert
more information >
Product Page this Question was Asked From
JT's Strong Arm Jack Stabilizer Kit for Travel Trailers
- Camper Jacks
- Travel Trailer
- Stabilizer Jacks
- Steel
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: jt`s strong arm
- Search Results: jts strong arm
- Search Results: lc191025
- Search Results: 191025
- Shop: Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits - Qty 4
- Shop: JT's Strong Arm Jack Stabilizer Kit for Travel Trailers
- Shop: JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Shop: Lippert JT's Strong Arm Stabilizer T-Handle Tightening Tool - 27-1/2" Long
- Q&A: Are etrailer Scissor Stabilizer Jacks A Compatible Replacement For J-2500 Scissor Stabilizer Jacks
- Q&A: How To Use JT's Strong Arm Jack Stabilizer Kit for Travel Trailers With Lippert Electric Stabilizer
- Q&A: How Many JTs Stongarm Stabilizers Get Attached to Electric Stabilizer Legs
- Q&A: Why Does JT's Strongarm Kit Come with 6 Total Arms
- Q&A: Where Does JT Strong Arm # LC191025 Install on a Travel Trailer
- Q&A: Is Adapter Needed to Used JT Strong Arm Stabilizer System with Lippert Electric Stabilizer Jacks
- Q&A: Installing JT's Strong Arm Jack Stabilizer Kit on 5th Wheel Trailer without Crossmember
- Video: Lippert JT's Strong Arm Jack Stabilizer Kit Installation - 2021 Grand Design Transcend Xplor Travel
- Video: Lippert JTs Strong Arm Jack Stabilizer Kit Installation - 2011 Forest River Surveyor Travel Trailer
- Video: JTs Strong Arm Jack Stabilizer Kit Electric Stabilizer Jack Pad Adapter Review
- Shop: Furrion Ductless RV Range Hood with Light - 12V - 23-1/2" Wide - Black
- Shop: Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar - Black
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- Shop: Trailer Hitch
- Video: Ventline Ventadome Replacement Vent Installation
- Search Results: 68149
- Video: Ventline Ventadome Trailer Roof Vent Installation
- Shop: Trailer Wiring
- Article: How to Replace an RV Roof Vent Cover
- Article: How to Replace or Install an RV Roof Vent