How To Use JT's Strong Arm Jack Stabilizer Kit for Travel Trailers With Lippert Electric Stabilizer

Question

Question:

Is the JT Strong Arm Kit able to be mounted to Lippert electric jacks? My 2018 Forest River Xlite travel trailer has the electric jacks in the front and the back.

asked by: Darren

1

Helpful Expert Reply:

Yes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers part # LC191025 are compatible with Lippert Electric Jacks on the 2018 Forest River Xlite with the use of the Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits part # LC314597. The adapter plates mount on either side of jack to allow for installation of swing bolts to install the JT stabilizer kit. I have attached a video for your reference.

expert reply by: Heather A

1

Answer 1

I wasn't able to find the bolt pattern for your J-2500 stabilizer jacks, but the great thing about scissor jacks is that if the bolt patterns don't match up you can just unbolt the mounting brackets from the jacks and swap them over to the…

view full answer...

Answer 2

I would be happy to help! To determine if you need the JT's Strong Arm Kit For Under 58" or Over 58" you will measure the distance between your stabilizer jacks. The #LC191025 you were looking at include six stabilizers and is for…

view full answer...

Answer 3

When using the Lippert JT's Strong Arm Jack Stabilizer Adapter Kit #LC314597 to attach the JT's Strong Arm #LC191023 to your electric jacks, you will want to mount the bars behind the jacks (toward the outside of the trailer). You can take a…

view full answer...

Answer 4

Basically you can install the JT Strong Arm #LC191025 on any jack on a travel trailer other than the tongue jack. Below I have included the text of the instructions: 1. Determine what style of jacks are on the chassis. 2. Locate a cross-member…

view full answer...

Answer 5

To allow the Lippert electric stabilizers to retract fully when using the JT Strong Arm stabilizers #LC191025 you will need to also use the adapter set #LC314597. If not used you could run into clearance issues while towing the trailer. The adapter…

view full answer...

Answer 6

Since you have electric stabilizers on your RV you would only use 4 of the arms that come with the part #LC191025. If you check out the install instructions link I attached you can see that your setup is shown in figure 3.

view full answer...

Answer 7

On the front landing gear legs of an RV you install two of the JT's Strongarms of part #LC191025 like what you see in the attached picture and install video. This is why the kits come with 6 arms total. Four for the front and 2 for the scissor…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

How To Use JT's Strong Arm Jack Stabilizer Kit for Travel Trailers With Lippert Electric Stabilizer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching